Corflute Yard Signs

product_banner
Corflute Yard Sign
wholesale plastic yard signs with print
custom coroplast lawn sign bulk order
China corflute yard sign factory direct
Corflute Yard Sign
wholesale plastic yard signs with print
custom coroplast lawn sign bulk order
China corflute yard sign factory direct
Corflute Yard Signs
Description:

✓ 4 mm and 5 mm corrugated PP, cut to any size

✓ Screen-print or UV digital print, single or double sided

✓ Round-corner cutting protects hands during install

✓ H-stakes supplied together with the signs if needed

✓ 200 pcs MOQ, mixed sizes share one container

✓ UV-stable sheet holds colour through two outdoor seasons

product details

Corflute yard signs are the fastest way to put a message on a lawn: a printed sheet of corrugated polypropylene that slides onto a wire H-stake and stands up in minutes. Because the board is waterproof and the printing is solvent or UV cured, the sign survives rain and strong sun for a full campaign season — which is exactly why real-estate agents, campaign teams and sign shops keep reordering them. We manufacture the sheet and print the sign in the same plant in Qingdao, so the board quality and the ink adhesion are checked by the same people, and you buy at sheet-maker pricing instead of paying a printer's markup on top of a trader's markup.

Printed corflute yard signs with H-stake metal frame

▤Thickness and Flute Direction: The Two Specs That Decide Whether a Sign Works

Most yard sign complaints trace back to one of two specs. The first is thickness. 4 mm (about 0.157") is the standard for lawn signs: light enough for a 10-inch H-stake to hold in ordinary wind, cheap enough for short campaigns, stiff enough to stay flat across an 18-inch span. 5 mm adds stiffness and is worth the small premium for larger formats, double-sided printing, or sites exposed to coastal wind. 3 mm is fine for hand-held or counter signs but will bow on a lawn. If a quote simply says "coroplast" without a thickness, ask again — the difference between a 4 mm sheet at 600 gsm and one at 900 gsm is roughly double the raw material.

The second spec is flute direction. The flutes must run vertically so the H-stake legs slide into them. A sheet cut with horizontal flutes cannot be staked at all, and we have seen batches from resellers arrive that way. Every sign we cut for stake mounting is orientated flutes-up before the knife touches it; if your design needs a horizontal-flute sign (for velcro or frame mounting instead), tell us at the quotation stage and we cut it that way on purpose.

4mm white coroplast sheets for yard signs

✎Printing Options: Screen Ink for Volume, Digital for Full Colour

Two printing routes cover nearly every yard sign job. Screen printing lays down one colour per pass — 1 to 4 colours is the economical band once a run passes roughly 500 pieces, and the solvent inks bite into the corona-treated surface, which is why screen-printed signs hold up longest in direct sun. UV digital printing handles full-colour artwork, gradients and photographic imagery with no plate cost, so it wins for runs of 200 to 500 pieces or for designs that change every week, such as open-house signs with different agent photos.

Both routes print single or double sided. Double-sided work has one practical note: the two faces are printed in separate passes, so exact front-to-back registration is not guaranteed, and designs that must align through the sheet (a cut-out arrow, for example) should be flagged to us before we schedule the run. Artwork is checked at pre-press: we confirm bleed, minimum stroke width and text size so small fonts do not clog in the flute valleys.

Custom printed corflute yard signboard

▤Standard Sizes, Corners and Finishing

North American customers order 18 × 24 inch and 24 × 18 inch signs most heavily, with 12 × 16, 12 × 18 and the slim 6 × 24 inch direction strips close behind. Metric markets run 450 × 600 mm and 300 × 450 mm. Any rectangle within a 1220 × 2440 mm sheet is a one-cut job; die-cut shapes — arrows, circles, house silhouettes — are quoted from the artwork.

Corner finishing matters more than buyers expect. Square corners are standard and free. Rounded corners (a 6 mm radius) cost nothing meaningful at volume and noticeably reduce the paper-cut style nicks installers get from handling hundreds of signs; campaigns that deploy volunteers almost always switch to rounded after the first weekend. Signs that mount to frames or walls can be ordered with pre-drilled holes or velcro-friendly flat edges instead of stake flutes.

Coroplast signage fitted with H-frame stakes

✔How a Yard Sign Batch Is Made and Checked

A typical order moves through four stations. First, the parent sheet is selected by grammage and colour — white is the norm, but yellow, blue, red, black and orange stock are held for campaign colours that would otherwise need heavy ink coverage. Second, cutting: signs are slit to size with flutes orientated for their mounting method. Third, printing: screen runs are colour-matched against the approved proof sheet, and digital runs are checked for banding and edge sharpness on the first ten pieces before the full batch proceeds. Fourth, packing: signs are stacked 25 to 100 pieces per bundle with kraft interleaves and strapped, so printed faces never rub ink onto each other in transit. Before the carton is sealed, an inspector pulls random pieces to verify print registration, corner finish and that an H-stake leg actually slides into the flute with the firm click that tells an installer it will hold.

★Where Corflute Yard Signs Earn Their Keep

The buyers we ship to fall into four camps. Real-estate teams order blank-faced signs pre-printed with only the brokerage identity, then write the address and agent mobile in oil-based marker per listing — the same board is erased with isopropyl alcohol and reused for the next property. Political campaigns order double-sided printed signs in the tens of thousands for a single cycle. Local service businesses — roofing, landscaping, pressure washing — buy 200 to 500 signs per season and place them at job sites, which is why the "22 years of experience" style social proof on the sign matters less than a phone number readable from a car. Finally, event organisers order short-run full-colour signs for wayfinding, and value the 7-day turnaround more than the unit price. If your project mixes several of these uses, mixed sizes can share one container — the MOQ is 200 pieces in total, not 200 per size.

Plastic yard sign used for real estate sale

⏱What Actually Moves the Price

Four variables drive a yard sign quotation. Quantity is the largest: crossing 500 pieces usually moves the job from digital to screen economics. Colour count is second on screen work — each additional colour adds a pass. Sheet thickness and grammage is third; we quote 4 mm at 700 gsm as the default because it survives wind better than the 450 gsm economy boards some resellers ship. Double-sided printing is fourth and simply roughly doubles the print cost of the single-sided equivalent. Artwork in vector format (PDF or AI) avoids redraw fees; photos taken from a business card will be redrawn by our pre-press team and the file stays on record for your reorders.

ℹAbout the Manufacturer

Qingdao Hengsheng Plastic Co., Ltd. has produced PP hollow board since 2012 at Lingang Industry Park, Huangdao District, Qingdao, Shandong, China. Four production lines plus in-house cutting and printing give a capacity of 20,000 tons a year, and six departments — production, quality inspection, sales, technical material supply, warehouse and new product development — carry an order from resin to container. Sign blanks and printed signs are exported to more than 120 countries, including the United States and Australia. See our company profile and the full yard sign range.

Written by the Hengsheng technical sales team and reviewed against current production records, Qingdao · Last updated: November 2026

Yard SignCorflute SignH-StakeOutdoor Advertising

Product parameters

MaterialPP corrugated board (coroplast style), UV-stabilised
Thickness3 / 4 / 5 / 6 mm — 4 mm at 700 gsm is the yard sign standard
Sheet sizeUp to 1220 × 2440 mm, cut to order (tolerance ±1 mm)
Standard sign sizes18″×24″, 24″×18″, 12″×16″, 12″×18″, 6″×24″, 450×600 mm, 300×450 mm
PrintingScreen print (1–4 colours) or UV digital (full colour)
SidesSingle or double sided
Sheet coloursWhite, yellow, blue, red, black, orange — Pantone matching available
Corner finishSquare, rounded (R6), die-cut shape, pre-drilled holes
AccessoriesH-stakes 8″×24″ / 10″×30″, velcro, cable ties
Packing25–100 pcs per bundle, kraft interleaves, strapped
MOQ200 pcs total, mixed sizes and designs share the run
Lead time7 days screen runs / about 15 days full-colour digital

faq

  • Q: Should I choose 4 mm or 5 mm for outdoor yard signs?

    A: 4 mm is the standard for lawn signs up to 24 inches and covers most campaigns. Choose 5 mm for larger formats, windy sites, or double-sided signs that carry more ink weight. For counter or hand-held use, 3 mm is enough.

  • Q: How long will a corflute yard sign last outdoors?

    A: The UV-stabilised board itself stays structurally sound for two years or more outside. Ink hold-out depends on the route: solvent screen inks typically hold full colour through 6 to 12 months of strong sun, and UV-cured digital inks perform similarly. For a one-season campaign this is rarely a limiting factor.

  • Q: Can you print both sides?

    A: Yes. Note that the two faces run in separate passes, so we do not promise exact front-to-back registration. Designs that must align through the board should be discussed at pre-press.

  • Q: Do you supply the metal H-stakes?

    A: Yes, H-stakes in the common 8 × 24 inch and 10 × 30 inch sizes can be supplied together with the signs, so one shipment covers the install. Tell us the stake size at quotation so the flute orientation matches.

  • Q: What is the minimum order?

    A: 200 pieces in total, and mixed sizes or designs can share the 200 — for example 100 printed signs plus 100 blanks.

  • Q: Can I order blank signs and print them locally?

    A: Yes. Blank signs ship with the corona-treated print face protected, and local screen or UV printers can print them the same way we do. Many sign shops buy blanks from us precisely because the sheet is already treatment-grade.

  • Q: Can I write on corflute with a marker?

    A: Oil-based and paint markers bond well to the treated surface; water-based markers wipe off. That is why real-estate buyers use oil markers for per-listing details and remove them with isopropyl alcohol for reuse.

  • Q: How do I get a sample and how fast can you ship?

    A: Free samples are available — new clients cover the courier cost, which is deducted from the first order. Standard runs ship 7 days after deposit; full-colour digital runs take about 15 days.

inquire now

Product Evaluation

WRITE A REVIEW

  • Rating:

We Offer You 100% Custom-Made Service

8618661437117

0086-18661437117

amy@qdhsplastic.cn

2546ba282d566414120b048cd876e3d